Snabb High Flow intake allows unrestricted airflow to the turbo while blocking engine heat will make significant increase in throttle response and power gains for a stock car.   A lightweight and durable powder-coated heatshield designed to block heat and allow for optimal flow into the turbo intake pipe and a 900cfm dry flow airfilter that will remove any restriction from your intake. You can connect this kit to aftermarket supplemental air intake systems.This kit is also up-gradable in the future to the larger S4 MAF or a 4" aluminum MAF for use with larger turbos. 

This kit does NOT connect to the stock intake pipe. This kit was designed to be used with large turbos and large MAF's so the orientation is altered to fit in the engine bay. You will need a Snabb intake pipe to install this kit.

• Select the option "I need an intake pipe"  if you are buying this kit but don't already have an intake pipe
• Select the option "Modify my Snabb Intake" if you already have a  Snabb intake.  The "modify my Snabb intake" option comes with a new longer aluminum pipe specially designed for this heat shield that bolts to the lower section of the Snabb intake pipe.
  

Mounting hardware is included. 

Again please not that this kit will not work with the stock plastic intake pipe.

INCLUDED

• Hardware to mount the Turbo Control Valve. (Configurable for either MAC Valve or Pierburg valve.)
  
• Mouting hardware to attach stock MAF to airbox
• Heat shield and hardware.
  
• High Flow 900CFM AEM Dryflow Air Filter