500+ HP capable EFR 7670b kit
As of 12/10/18 we have a customer making 605hp/650tq with this kit on E85!
TURBO INTAKE and COOLING:
Borg warner EFR 7670bTurboSnabb High flow Intake pipe for 4" MAF housing- PTC delete
Snabb high-flow airbox with 4" maf housing and mounting for Milletech catch can - (MAF sensor or speed density sensors tuners choice *)
Snabb 3.5" thick intercooler 500-850 HP capable
Snabb 2.5" charge piping kit with upgraded MAP sensors - tuners choice *
Turbo Water supply and drain lines
Braided turbo oil supply line
Milletech tubular Exhaust Manifold
Milletech rear transmission mount
Milletech hard oil drain line
Milletech coolant pipes
Milletech low profile High Pressure AC line
Milletech 316 stainless large plenum intake manifold
Milletech vent to atmosphere catch can (plumbing for catch can not included) EXHAUST (not shown)Milletech 3" Down pipe
Snabb test pipe or pipe with Vibrant 500-850 hp GESI race cat
Racing cat back exhaust - multiple options from Milletech or Jetex (race systems with no mufflers or resonators for race applications only!)
OPTIONAL: (not shown)
Methanol injection Aquamist HFS3 recommended and available for order direct from SnabbTurbo/manifold support bracket
TUNING
ADDITIONAL NOTES:
You must delete factory breather system
For the motor - at minimum - the block should be shimmed for this build, although it is recommended that you install h-beam rods for a build of this type.
Fueling - upgrade fuel pump, upgrade fuel injectors and possibly fuel rail of tuners choice.
EXTENSIVE MODIFICAITONS to vehicle and ancillary systems needed to install this kit. This kit does not include every small piece that you will need. It includes all the large pieces. Intercooler and intercooler piping is designed to install with no cutting to frame on a V70. Additional modifications to bumper support bar are needed for installation on an S60. Installation is available by appointment but be prepared to leave vehicle for an extended period of time. Pricing for installation is separate from kit.
